- The Pro Body Tool easily places the
axle holes perpendicular to the centerline of the car and
ensures parallelism in the axles front to rear. This helps
insure correct tracking of the car and aids in alignment.
- The Pro Body Tool locates all of the axle
holes at the same height on the body which helps ensure the
car is sitting square to the track, for a equally balanced car
left to right and an aid in alignment.
- The Pro Body Tool helps guide the thin #44
drill bit required to drill axle holes preventing deflection
for a more accurate job. This is something that can not be
done with a drill press plus due to the clearance required in
the quill assembly in most hobbyist and home use drill presses
to make the press work, there will most likely be some run-out
in the drill chuck, this makes the Pro Body tool the most
accurate choice plus only a hand drill is required for the
job.
- The Pro Body Tool reduces friction!!! By
correctly placing the axles in the body a builder will not
have to bend or tweak the axles to get the car to run
straight. In all cases, if an axle needs a slight bend to
correct alignment the axle placement is incorrect and the bent
axle jeopardizes correct axle to hub alignment. Although it
has corrected the alignment issue it has more than likely
created a slightly higher friction between the axle and hub.
© DerbyWorx Inc. View
Instruction Video
|
|
